4 Kanal 433Mhz Alıcı Verici Kit

4 Kanal 433Mhz Alıcı Verici Kit RX480 - TX118A

      Alıcı modül 1527 Kodu ile uyumlu farklı vericiler ile de çalıştırılabilir. Alıcı üzerindeki buton kullanılarak farklı alıcıların kodunun öğrenilmesi sağlanır.

433 Mhz Mini Wireless Receiver and Transmitter Remote Control Learning Code 1527 Decoder Module 4 Ch output With Learning Button
_x000D_  

Learning Button diy kit For Arduino/ARM/MCU For Wireless Power switch socket remote control LED electric doors Etc.
_x000D_ Application environment:
_x000D_ Remote control switch,motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.

Model:  RX480-E4

• Working Voltage : DC3.3~5V
• Quiescent Current : ≤5mA
• Working Frequency: 315MHz / 433MHz( Others can be customized )
• Receive Sensitivity: -108dB
• Receive Distance:  15 meters above
• Frequency band: ±0.2MHz
• Working Temperature : -25~75
• Working mode:Point move, self-locking, interlocking
• The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons.

Pins Instruction

• GND : groud or negative pole
• +V : DC3.3~5V input
• D0: Data output
• D1: Data output
• D2: Data output
• D3: Data output
• VT: Output

How To Programming:​
_x000D_  
_x000D_ 1. Delete existing data: Press learning button 8 times. Response: LED flashes 7 times.
_x000D_ 2. Learning remote code: press learning key once, twice or three times (see below).
_x000D_ LED turns on: learning mode is active. Press any button of the remote control.
_x000D_ LED indicator flashes three times: learning successfully completed.
_x000D_ 3. Test: after the above operation , the receiver board can be controlled by the remote control .
_x000D_  
_x000D_ More transmitters with different IDs can be learned and stored additionally, starting with step 2.  
_x000D_ A mixture of different modes is possible.
_x000D_  
_x000D_ Button usage (sets mode and starts pairing process):
_x000D_ Press once: Inching mode (Momentary Mode)
_x000D_ Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels)
_x000D_ Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)
_x000D_  
_x000D_ (This instructions is provided by Manfred, thanks to Manfred)

Model: TX118SA-4

• Transmitting power: 11dbm
• Distance: 200M
• Emission current: 10MA
• Standby current: less than 3UA
• Rate of fire: maximum 10KB / S
• Transmit deviation: +/- 7. 5KHZ / narrow-band emission
• Modulation: ASK
• Operating Voltage: DC 3V-24V
• Encoding : EV1527 1527 Learning code
• Customizable special code: MCU type.Optional fixed encoding type: PT2262 / EV1527 / HT6P20B
• Key data: A, B, C, D groups of 4 inputs can be combined into 15 groups.Standby current: <3UA
• Each module has a unique ID address code.
• All modules K1-K4 four key code is the same.

Pin Description:

• - : Negative power supply
• +: Positive power supply, DC 3-24V
• K1: External input keys, short to ground start transmitting data to 1, the A button on the remote control.
• K2: External input keys, short to ground 2 start transmitting data, the equivalent of the remote control B button.
• K3: External input keys, short to ground start transmitting data 3, the equivalent of the C key on the remote control.
• K4: External input keys, short to ground 4 start transmitting data, the equivalent of the remote control D keys.
• ANT: transmitting antenna

Paket İçeriği:

•   1 Adet TX118SA-4 Verici Modül
•   1 Adet RX480-E4 Alıcı Modül
•   2 Adet Anten